Description
Product Name: stepping motor drive controller
Product introduction:
1, this module is the pulse generating module, the supply step driver as a signal. If you want to control the stepper motor, it must be equipped with the drive to go.
2, this simple controller + stepper driver + stepper motor + DC power supply can be composed of a set of simple control platform.
3, the controller has high 5.4k-160khz, 540-16.6khz, 80-2.4khz a total of 3 kinds of low frequency signal can be used to select the jumper.
4, can produce pulse information, can also produce PWM signal, can choose the jumper.
5, the frequency of measurement: PUL and common cathode end (or total) two ports
Not synchronized into the motor drive port marking different but the same function
EN=ENA=FREE enable
PUL=PULS=CLK pulse
DIR=CW=CWW direction
Total connection (B connection)
EN+ PUL+ DIR+ together received a total end.
EN- EN
PUL- CLK
DIR- DIR
Common negative connection method (B)
PUL- DIR- EN- is connected to the negative side.
EN+ EN
PUL+ CLK
DIR+ DIR
With the launch of a passenger base drive, can be directly connected to the A of the white hole terminal (common cathode connection)
Reviews
There are no reviews yet.